运动检测+MJPEG视频录制


# MJPEG Video Recording on Movement Example
#
# Note: You will need an SD card to run this example.
#
# You can use your OpenMV Cam to record mjpeg files. You can either feed the
# recorder object JPEG frames or RGB565/Grayscale frames. Once you've finished
# recording a Mjpeg file you can use VLC to play it. If you are on Ubuntu then
# the built-in video player will work too.
#
# This example demonstrates using frame differencing with your OpenMV Cam to do
# motion detection. After motion is detected your OpenMV Cam will take video.

import sensor, image, time, mjpeg, pyb, os

RED_LED_PIN = 1
BLUE_LED_PIN = 3

sensor.reset() # Initialize the camera sensor.
sensor.set_pixformat(sensor.RGB565) # or sensor.GRAYSCALE
sensor.set_framesize(sensor.QVGA) # or sensor.QQVGA (or others)
sensor.skip_frames(time = 2000) # Let new settings take affect.
sensor.set_auto_whitebal(False) # Turn off white balance.

if not "temp" in os.listdir(): os.mkdir("temp") # Make a temp directory

while(True):

    pyb.LED(RED_LED_PIN).on()
    print("About to save background image...")
    sensor.skip_frames(time = 2000) # Give the user time to get ready.

    pyb.LED(RED_LED_PIN).off()
    sensor.snapshot().save("temp/bg.bmp")
    print("Saved background image - Now detecting motion!")
    pyb.LED(BLUE_LED_PIN).on()

    diff = 10 # We'll say we detected motion after 10 frames of motion.
    while(diff):
        img = sensor.snapshot()
        img.difference("temp/bg.bmp")
        stats = img.statistics()
        # Stats 5 is the max of the lighting color channel. The below code
        # triggers when the lighting max for the whole image goes above 20.
        # The lighting difference maximum should be zero normally.
        if (stats[5] > 20):
            diff -= 1

    m = mjpeg.Mjpeg("example-%d.mjpeg" % pyb.rng())

    clock = time.clock() # Tracks FPS.
    print("You're on camera!")
    for i in range(200):
        clock.tick()
        m.add_frame(sensor.snapshot())
        print(clock.fps())

    m.close(clock.fps())
    pyb.LED(BLUE_LED_PIN).off()
    print("Restarting...")
Copyright 杭州云江科技有限公司 2017 all right reserved,powered by Gitbook该文件修订时间: 2018-04-02 09:53:12

results matching ""

    No results matching ""